Lubricating a Kitchenaid stand mixer is an essential part of its upkeep and maintenance. Properly lubricating your Kitchenaid stand mixer helps keep it running smoothly and efficiently. Here are some steps to help you properly lubricate your Kitchenaid stand mixer.
Step 1: Unplug the mixer. Before you begin lubricating your Kitchenaid stand mixer, always make sure that it is unplugged.
Step 2: Remove the bowl and the beater attachment. Locate the plastic pin that holds the bowl and beater attachment in place. Pull this pin out and remove the bowl and beater attachment.
Step 3: Clean the bowl and beater attachment. Take a soft cloth and wipe down the bowl and beater attachment. This will help remove any food particles or dirt that may have accumulated on the bowl and beater attachment.
Step 4: Lubricate the bowl and beater attachment. Take a lubricant such as WD-40 and apply a thin layer over the entire surface of the bowl and beater attachment. This will help prevent parts from wearing down and will help keep them running smoothly.
Step 5: Replace the bowl and beater attachment. Place the bowl and beater attachment back onto the Kitchenaid stand mixer and reinsert the plastic pin.
Step 6: Lubricate the gears. Take a lubricant such as WD-40 and apply a thin layer over the gears of the Kitchenaid stand mixer. This will help keep them running smoothly and efficiently.
Step 7: Plug in the mixer. Once all of the parts are lubricated, plug the mixer back in and you are ready to mix.
By following these steps, you can ensure that your Kitchenaid stand mixer is properly lubricated and ready to use. Keeping your mixer properly lubricated will help keep it running smoothly and efficiently, and will help prolong its life.
Frequently Asked Questions
1. How often should I lubricate my Kitchenaid Stand Mixer?
Answer: You should lubricate your Kitchenaid Stand Mixer at least once a year, or more frequently if you use it often.
2. What type of lubricant should I use on my Kitchenaid Stand Mixer?
Answer: You should use a food-grade lubricant, such as a white mineral oil or a food-grade grease, on your Kitchenaid Stand Mixer.
3. What parts of my Kitchenaid Stand Mixer should I lubricate?
Answer: You should lubricate the gears, shafts, and other moving parts of your Kitchenaid Stand Mixer.
4. How do I lubricate my Kitchenaid Stand Mixer?
Answer: First, make sure the mixer is unplugged, then remove any attachments and cover the attachments with a cloth to protect them. Then, apply a small amount of lubricant to the moving parts and use a brush or cloth to spread it around. Finally, wipe off any excess lubricant and reassemble the mixer.
5. Can I use any lubricant on my Kitchenaid Stand Mixer?
Answer: No, you should only use a food-grade lubricant, such as a white mineral oil or a food-grade grease, on your Kitchenaid Stand Mixer. Do not use any other type of lubricant, as it can damage the mixer.